GWM-R60 Digital Torque Tester 1.8-60 N.m 3/8 - Precision Tool from China Suppliers and Factory
In the world of automotive repair and precision instrument maintenance, having the right tools at your disposal is crucial. The GWM-R60 Torque Wrench is designed to meet the high demands of professionals and enthusiasts alike, combining advanced technology with user-friendly features to deliver an unparalleled experience. Whether you’re working in a dimly lit garage or a tight workspace, the GWM-R60 is your go-to tool for accurate and efficient bolt tightening.
One of the standout features of the GWM-R60 is its upgraded silicone buttons. Based on extensive user feedback, the ordinary buttons have been replaced with high-quality silicone buttons that offer a more sensitive and responsive operation. This enhancement not only improves the overall user experience but also allows for smoother adjustments and settings, making it easier to achieve the desired torque values.
Features
Large Screen Display, Backlight Function
Precision: Clockwise ±2%, Counterclockwise ±2.5% (Total range of 20% ~ 100%)
Buzzer and LED Light will start when predetermined torque value is reached (Only in Peak Mode)
Four types of engineering units (N.m, kgf.cm, ft.lbf, in.lbf)
Three Measuring Modes: Real-Time Mode, Peak Mode, Preset Mode
Switches itself off after 3 minutes automatically
999 sets of record data can be saved
Product Technical Specifications
*: Please refer to the remarks at the back of the form
| Ordinary Model | 10 | 30 | 60 | 100 | 135 | |
| Replaceable Head Model | 10 | 30 | 60 | 100 | ||
| Maximum operating range | N.m | 10.000 | 30.00 | 60.00 | 100.00 | 135.0 |
| ft.lbf | 7.380 | 22.14 | 44.28 | 73.80 | 99.6 | |
| in.lbf | 88.50 | 265.5 | 531.0 | 885.0 | 1194 | |
| kgf.cm | 102.00 | 306.0 | 612.0 | 1020.0 | 1377 | |
| Connector (inches) | 1/4 | 3/8 | 1/2 | 1/2 | ||
| Inter changeable head connection size | 9*12 | |||||
| Buzzer Setting range （N.m） | 0.3~10 | 0.9~30 | 1.8~60 | 3~100 | 4~135 | |
| Ordinary Model Length(mm) | 235 | 245 | 290 | 388 | ||
| Replaceable Head Model Length (mm) | 205 | 240 | ||||
| Accuracy*1 | Clockwise: ±2% Counterclockwise: ±2.5% | |||||
| Data storage capacity | 999 | |||||
| Operation mode | Peak mode (P) Real-time mode (T) Preset value mode (Pre) | |||||
| Unit | N.m、kgf.cm、ft.lbf、in.lbf | |||||
| Ratchet head form | Two-way ratchet head | |||||
| Number of ratchet teeth | 72 teeth | |||||
| Number of buttons | 5 | |||||
| Battery | 2 7# batteries | |||||
| Operating temperature | -10°C~60°C | |||||
| Storage temperature | -20°C~70°C | |||||
| Drop test height | 1 meter | |||||
| Vibration test conditions | 10G | |||||
| Life test*2 | 10000 times | |||||
Notice:
*1. The accuracy guarantee range is 20% to 100% of the maximum operating value. The torque accuracy is the normal value. The calibration accuracy takes the middle groove of the five grooves on the handle as the calibration point. To ensure accuracy, it is recommended to calibrate it once a year.
*2. "Once" means that the wrench is applied from 0 N.m to the maximum operating setting value of the wrench, and then back to 0 N.m.
Instructions
Press the "P/C" button lightly to turn on the device. If the battery is insufficient after the device is turned on, it will automatically shut down and it can be used normally after replacing the battery.
In the power-on state, when the user interface is not the setting interface, press the U/S button to switch between the four engineering units.
In the power-on state with no power, press the M button to switch modes.
Real-time measurement mode: The torque value will display the current value in real time as the applied torque changes. When the torque is unloaded, the torque value will automatically return to zero. The “T” character displayed on the screen is the real-time mode.
The force applied by the wrench will increase from the minimum measured value gradually. When the force is continuously applied, the on-screen torque value will always display the maximum torque value when the user applies a different magnitude of force; when the user unloads the force, the on-screen display will record and lock the maximum torque value during the force application process, which is the peak torque. And this value will be flashing. Press the P/C button to clear the peak torque. Maybe, if it needs to be measured again, the user can reload the applied force to update the locked peak torque without clearing and resetting directly. The “P” character displayed on the screen is the Peak mode.
First, set an ideal preset torque value through the Ʌ or V button, and then press the U/S button lightly to save and return to the measurement interface. The force applied by the wrench will increase from the minimum measured value gradually. When a force is applied, the on-screen torque value will change as the user applies different forces; the reading will increase with the increase of the force, and decrease with the decrease of the force. When the user unloads the force, the on-screen display will return to 0. The “Pre” character displayed on the screen is the preset mode.